| ■Varnisher and Coater | |
| Model VRN | Roll coating type. Gripperless operation. To be used for thicker paper ( thicker than postcard ) |
| Model MRA | Automatic varnisher in line with feeder, VRN, dryer, cooler and stacker. |
| Model MG | Model MG is an improved type of Model SG. That is, the sheet is fed by convenient "face side up system" instead of "back side system". A new type dryer is introduced on this model to save space. |
| Model PS | This model is designed to make PS plate. The sensitive material (liquid) is coated on the PS plate. The coating requires high precision method. |
| Model UVR | UV curing unit is installed on coater. This model is a roll coater type like VRN and coats only on the board. |
| Model VRV | No gear marks after coating, since 3
rollers are driven by individual belts. Noiseless and easy operation. A
special roll coater for thicker sheets. |
| Model VRVP-5 | Pamphlet(PDF) |
Model SC-6
| To caot alkaline water onto acid
paper before print, it can prevent oxidation of paper and also make good
fixing of ink on paper. |
Model BW-5
（Wax Coater） | The
machine to coat wax permeate paper bag and make water-proof. The bag at fish
is durable and it can put fishes directly into the bag. |
Model VRP
（Rotary Pattern Coater） | So
far pattern caoting have been done by Gravure printing press or Gripper
coater. But this model is done by Rotary Cylinder type machine with easily
change of its printing plate. |
| ■Endless Calender | |
Model CR-18
（electric heating system） | Introduction of endless belt is what Matsumoto has created. Government Prize has been awarded for the development of this model. |
Model CR-20
（steam heating system） | Water cooling method for endless belt is introduced to get better gloss. Electric energy and space are considerably saved. Majority of Japanese users for Endless
Calender use this model instead of Model CR-18. |
Model CR-30
（steam heating system） | Diameter of
calendering roll has been lengthened to 700mm to get higher speed (max:60m/min.) and more gloss. |
Model CRW-30
（steam heating system） | Adapted
300φ Pressure Rubber Roller to CR-30 Calender machine and increased the
compression time to stainless belt. Actualized further good gloss result and
increased 20-30% of working speed. |
| Model VC-18 | Automatic calendar in line with varnisher Model VRN and
calender Model CR-18 to get more effect. |
| Model VC-20 | Automatic calender in line with Model VRN and CR-20. This has good reputation for its high productivity.
Pamphlet(PDF) |
| Model VCA-30 | Automatic high speed calender in line with VRN, CR-30 and stacker. Hot-air circulation system is introduced in the drying chamber. Max
speed:60m/min. Pamphlet(PDF) |
| ■Laminator | |
| Model MCL | Window Type Film Laminator. It is
possible to cut 80 sheets by Knife Cutter.
Pamphlet(PDF) |
| Model LW | Manual type sheet laminator. This model is a basic model for latest high speed automatic laminator. |
| Model LWFC | Automatic laminator combined with feeder, coater, dryer, laminator and
separator. Most popular model. |
Model LW-18
（electric heating system） | High-speed automatic laminator. Max speed:60m/min. Heated-air circulation system is introduced in the drying oven. |
Model LW-20
（steam heating system） | High-speed automatic laminator. The model saves energy and floor space. Max speed:60m/min. Heated-air circulation in the drying oven. |
| Model LWP | Thermal laminator. This model has no coating and drying unit. Users can enjoy no pollution.
Pamphlet(PDF) |
| Model ＤＬ | A drum type Dryer serves as well
as Laminate Roller actualized cut down of drying space and increased the
working speed. |
| ■UV Calender | |
| Model MGULA | Flexo Coater Type Film Calender. Video
⇒ |
